From time-to-time the mechanisms in Pop Up wastes become stuck. If this has occurred it may prove difficult to remove or release this without uninstalling the waste. However, if you are willing to try to remove it yourself, you may have success with the following directions: Put your fingers down the wastes and try to […]

Many of the cleaning products used in bathrooms are unsuitable for prolonged contact with electroplated finishes such as Chrome Plating. It is common that these products are used when moping floors. In the shower, the residue left from these products is washed away through the regular use of this facility. However, in the case of […]

All Bermuda Tile Insert Floor Wastes come with a strainer installed below the tile insert. This strainer is designed to catch hair etc. so that it doesn’t wash down the drain. To clear the strainer, simply lift the tile insert out and remove and clean the strainer. You may choose not to re-install the strainer […]

This is generally the result of a partial blockage. This blockage can be a build-up of hair etc. that has caught on the mechanism of the waste. To check this, simply remove the mechanism (see video), clear away any hair, rinse the mechanism and drop it back into your waste. If this does not rectify […]

The most common cause for the waste to get stuck in the closed position is lack of cleaning and as such the mechanism is clogged with gunk. This will require you to remove the cartridge and clean the mechanism. The best way to do this is get a piece of string or Dental floss and […]

Like all Bathroomware fixtures and fittings, the Pop Down® waste should be cleaned regularly. This should be done with a soft cloth and warm soapy water. No harsh cleaning products should be used for cleaning. Note: The Pop Down® cartridge should be removed regularly so all hair / debris can be disposed of. Please refer […]